Choice Behavioral Model of Shared Bicycle: An Empirical Study Based on SEM

Wireless Personal Communications - The purpose of this study is to construct a structural equation model of shared bicycle added psychological factors proceeding from the theory of planned...     

金属增材制造技术研究热点聚类分析

为深入分析金属增材制造技术分类和发展状况,采集中国期刊全文数据库(CNKI)收录的核心期刊上的768篇科技文献,借助文献分析可视化软件CiteSpace,对关键词聚类进行了全景式描绘,构建金属增材制造技术知识图谱,揭示该技术研究分类以及演化趋势。     

基于信息熵抑制的大数据特征隐匿性加密仿真

针对传统大数据特征加密方法中大数据精度较差、加密耗时较长的问题,提出基于信息熵抑制的大数据特征隐匿性加密方法。分析信息熵抑制相关理论,采用信息熵映射函数对大数据分类,将信息熵抑制过程转化为计算2个文件相似性的过程,并根据余弦相似度公式以及Hamming距离值计算数据相似度,完成数据消冗。在完成数据消冗的基础上,分析分组密码方法和ECC加密方法,结合两种方法得到大数据特征隐匿性加密处理计算公式,实现基于信息熵抑制的大数据特征隐匿性加密。实验研究结果表明,所提方法能够有效去除冗余数据,提升大数据精度,加快数据加密的处理速度,高效完成大数据加密过程。     

聚类混合型数据的密度峰值改进算法

聚类混合型数据，通常是依据样本属性类别的不同分别进行评价。但这种将样本属性划分到不同子空间中分别度量的方式，割裂了样本属性原有的统一性；导致对样本个体的相似性评价产生了非一致的度量偏差。针对这一问题，提出以二进制编码样本属性，再由海明差异对属性编码施行统一度量的新的聚类算法。新算法通过在统一的框架内对混合型数据实施相似性度量，避免了对样本属性的切割，在此基础上又根据不同属性的性质赋予其不同的权重，并以此评价样本个体之间的相似程度。实验结果表明，新算法能够有效地聚类混合型数据；与已有的其他聚类算法相比较，表现出更好的聚类准确率及稳定性。     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

ASME Ⅱ卷D篇表U数据作为设计校核中材料验收标准存在问题及探讨

ASME标准钢板对于短时高温抗拉数据无规定,但设备设计人员在校核时又要用到此数据,于是有些设计文件在技术要求中将ASME II卷表U的数据作为材料验收的标准。针对此种做法引发的争议及涉及的主要问题进行试验验证和分析探讨。研究结果表明,ASME II卷D篇表U中的数据是基于室温抗拉强度保证值,并根据拟合曲线将室温保证值提高了10%得到的,实测数据与ASME规范数据不一致,部分材料在250~350℃存在动态应变时效现象,但仍不满足设计要求。材料经模拟焊后热处理后性能下降,难以到达交货态的要求。给出了短时高温抗拉强度的选用建议。     

海上稠油油田蒸汽吞吐产量确定新方法

针对目前蒸汽吞吐产量预测模型假设条件简单、普适性差等问题,一般采用测试法和类比法综合确定海上稠油油田蒸汽吞吐初期产量。由于目前海上油田通常只开展常规测试,无法直接获得热采开发初期产量。笔者提出海上稠油油田蒸汽吞吐初期产量确定新方法,建立蒸汽吞吐相对于常规开发的初期产量倍数预测模型,通过蒸汽吞吐产量倍数,将常规测试确定的产量转化为蒸汽吞吐产量。研究表明,蒸汽吞吐初期产量倍数主要受储集层渗透率、原油黏度、注入强度、蒸汽干度等因素影响,利用正交试验设计和多元回归等方法,建立海上稠油油田蒸汽吞吐初期产量倍数与油藏地质参数及注入参数之间的非线性预测模型,该模型经实际生产数据验证,预测误差小于5%,可靠性高,能够为海上稠油油田蒸汽吞吐初期产量的确定提供依据。     

基于改进型巴特勒矩阵的短波8元圆环阵列多波束技术研究

传统短波接收天线为单一的波束指向天线或全向天线。为提高接收天线增益,同时产生多个波束指向不同方向,提出利用巴特勒矩阵作为短波接收天线阵的无源波束形成网络。在传统8×8巴特勒矩阵结构的基础上,设计改进型8×8巴特勒矩阵。以均匀8元圆环阵列为天线模型,利用FEKO仿真分析了其天线特性。在3~11 MHz频段内,P2、P3、P6、P7四个端口分别在202.5°、292.5°、112.5°、22.5°方向上得到了方向性较强的单一波束,7 MHz时波束增益达到最大11.9 dBi,波瓣3 dB宽度平均为60°;在P1、P4、P5、P8端口产生相同的2个波瓣,7 MHz时其波束增益达到最大9.8 dBi,波瓣3 dB宽度平均为89°。由以上仿真分析得出,该改进型8×8巴特勒矩阵能够同时产生6个波束,波束覆盖8个方向,提高了波束的方向性,提高了天线增益。     

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5?wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation.

Highlights

• Ion implantation inhibits SCC susceptibility.

• The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary.

• Implantation-induced damage leads to high-density dislocations.

• The surface was amorphised due to high-density dislocations.